Heat Exchanger and Condenser Cleaning Systems



Tube Cleaner Drills and Brushes from Airetool

Drills & Brushes


  Models

Complete Cleaning Systems

  • Complete cleaners consist of an air motor with integral water feed valve couplings; up to 22 ft. of shafting with necessary couplings (please specify shaft length required); motor shaft wrench and an extra set of motor blades.
  • The CC 475 Cleaner Complete includes two drills of any type or size up to 1", three spiral brushes up to 1" and 15 feet of 3/8 inch water hose.
  • The CC 475-PS Cleaner Complete includes two drills of any type or size up to 1-1/2", three spiral brushes up to 1-1/2" and 15 feet of 3/8 inch water hose.
  • CC-375-1, 325-1 & 325-HP: Includes Ball bearing trolley and rope block.

Drag your finger across the table to scroll

Model Number Order Number
Lightweight Condenser Cleaners Complete
CC-475 4105601
CC-475-PS 4105602
Geared Drive Cleaners Complete
CC-375-1  
CC-325-1 4105603
CC-325-HP 4105604PT
15 feet of 3/8 inch Water Hose
Water Hose 4105082
Water Feed Attachment
WF-100 4098700

Cleaning Motors



Cleaning Motors from Airetool

CC-475


Cleaning Motors from Airetool

CC-325

Clean Tubes = Higher Operating Efficiencies

Airetool lightweight condenser & geared drive cleaners make it easy to maintain your industrial process at a high level of efficiency by providing cleaning motors that are both powerful and durable.

Drag your finger across the table to scroll

Model Number Order Number Range.5 RPM Weight Length Air Inlet Operating Air Pressure Water Inlet Max. Water Pressure
lbs. Kg in. mm NPT PSI kg/cm2 NPT PSI kg/cm2
Lightweight Condenser Cleaners
CC-475 4090900 up to 1 in. (25.4 mm) ID Tubes 3800 10 4.53 15-3/4 400.0 1/2 90-100 6-7 3/8 100 7
CC-475-PS 4105343 up to 1-1/2 in. (38.1 mm) ID Tubes 2300 10 4.53 15-3/4 400.0 1/2 90-100 6-7 3/8 100 7
Geared Drive Cleaners*
CC-375-1 4090700 up to 1-3/4 in. (44.4 mm) ID Tubes 1200 38 17.20 19 482.6 1 90-100 6-7 3/8 100 7
CC-325-1 4090600 up to 2 in. (50.8 mm) ID Tubes 800 42 19.00 19 482.6 1 90-100 6-7 3/8 100 7
CC-325-HP 4104821 up to 2 in. (50.8 mm) ID Tubes 800 44 19.90 19 482.6 1 90-100 6-7 1/2 5000 350

* Water hose not included.


Shaft Components

Shaft Components for Heat Exchanger Tube Cleaning Systems from Airetool

Shafting components connect the motor to the drill head or brush.

  • Drive Shafts & Driven Shafts come in standard lengths of five and ten foot
  • Other lengths available on request

Drag your finger across the table to scroll

Tube I.D. Shaft Diameter Drive Coupling For CC-475 CC-475-PS & WF-100 Drive Coupling Thread Drive Coupling For CC-375-1 CC-325-1 & CC-325-HP Drive Coupling Thread Drive Shaft Length* Drive Shaft Thread Shaft Coupling Drive Coupling Thread Drive Shaft Length* Drive Shaft Thread
in. mm in. mm 5 ft. 10 ft. 5 ft. 10 ft.
.291-.358 7.39-9.09 1/4 6.35 AT-337-A (1201100) 5/8" NF x 1/4" NF CC-336-5 (1717133) CC-336-10 (1717151) 1/4" NFM x 10-32 F CC-334 (1232800) 10-32M CC-335-5 (1717132) CC-335-10 (1717150) 10-32 F x 10-32 F
.359-.420 9.09-10.67 5/16 7.94 AT-333-A (1201000) 5/8" NF x 5/16" NF AT-333 (1200900) 1" NF x 5/16" NF CC-332-5 (1717135) CC-332-10 (1717153) 5/16" NFM x 1/4" NFF CC-330 (1232500) 1/4" NFM CC-331-5 (1717134) CC-331-10 (1717152) 1/4" NFF x 1/4" NFF
.421-.483 10.67-12.27 3/8 9.52 AT-321-A (1200700) 5/8" NF x 3/8" NF AT-352 (1201300) 1" NF x 3/8" NF CC-324-5 (1717137) CC-324-10 (1717155) 3/8" NFM x 1/4" NFF CC-322 (1231900) 1/4" NFM CC-323-5 (1717136) CC-323-10 (17171540) 1/4" NFF x 1/4" NFF
.484-.608 12.27-15.44 7/16 11.11 AT-313-A (1200300) 5/8" NF x 7/16" NF AT-353 (1201400) 1" NF x 7/16" NF CC-316-5 (1717139) CC-316-10 (1717157) 7/16" NFM x 5/16" NFF CC-314 (1230800) 5/16" NFM CC-315-5 (1717138) CC-315-10 (1717156) 5/16" NFF x 5/16" NFF
.609-.831 15.44-21.11 1/2 12.7 AT-309-A (1200100PT) 5/8" NF x 1/2" NF AT-359 (1201900) 1" NF x 1/2" NF CC-312-5 (1717141) CC-312-10 (1717159) 1/2" NFM x 3/8" NFF CC-310 (1230400) 3/8" NFM CC-311-5 (1717140) CC-311-10 (1717158) 3/8" NFF x 3/8" NFF
.832-1.055 21.11-28.80 5/8 15.88 AT-301-A (1199100) 5/8" NF x 5/8" NF AT-351 (1201200) 1" NF x 5/8" NF CC-304-5 (1717144) CC-304-10 (1717163) 5/8" NFM x 3/8" NFF CC-302 (1229500) 3/8" NFM CC-303-5 (1717143) CC-303-10 (1717162) 3/8" NFF x 3/8" NFF
1.056-1.561 28.80-39.65 3/4 19.05 AT-317-A (1200500) 5/8" NF x 3/4" NF AT-357 (1201800) 1" NF x 3/4" NF CC-320-5 (1717146) CC-320-10 (1717165) 3/4" NFM x 7/16" NFF CC-318 (1231400) 7/16" NFM CC-319-5 (1717145) CC-319-10 (1717164) 7/16" NFF x 7/16" NFF
1.562-2.374 39.65-60.30 1 25.4 AT-325-A (1200800) 5/8" NF x 1" NF AT-354 (1201500) 1" NF x 1" NF CC-328-5 (1717148) CC-328-10 (1717167) 1" NFM x 7/16" NFF CC-326 (1232200) 7/16" NFM CC-327-5 (1717147) CC-327-10 (1717166) 7/16" NFF x 7/16" NFF

* Other lengths available upon request.


Drills and Brushes

Drills and Brushes for Tube Cleaners from Airetool

Airetool drills are designed especially to prevent damage to the tube I.D., and are available in a variety of shapes to remove all types of scale deposits. Passages in the drill shaft enable flushing fluid to reach the drill cutting edge. Larger sizes available on request.

  • Type "AT" - standard drill for medium deposits
  • Type "CB" - standard drill ("AT" style) for medium deposits with carbide insert for better durability
  • Type "CB-xxx-HP" - high pressure drills provide better flushing power when used with the CC-325-HP motor
  • Type "TW" - standard twist drill for thick deposits
  • Type "CT" - standard twist drill ("TW" style) for thick deposits with carbide insert for better durability
  • Wire Brushes are for light deposits

Minimum order quantities may apply.

Drag your finger across the table to scroll

Tube I.D. Diameter of Drill or Brush Stud Thread AT (Standard) Drills CB (Carbide) Drills CB (Carbide) "HP" Drills* CT (Carbide Twist) Drills TW (Twist) Drills Wire Brush
in. mm in. mm Model (Order No.) Model (Order No.) Model (Order No.) Model (Order No.) Model (Order No.) Model (Order No.)
.291-.306 7.39-7.77 0.281 7.14 10-32 UNC AT-199 (1192200) CB-199 (1220400)       199-B (1020412)
.306-.321 7.77-8.15 0.296 7.52 10-32 UNC AT-199-5 (1192300) CB-199-5 (1220500)       199-5-B (1020415)
.322-.337 8.18-8.56 0.312 7.92 10-32 UNC AT-200 (1192400) CB-200 (1715666)        200-B (1020460)
.338-.353 8.51-8.97 0.328 8.33 10-32 UNC AT-200-5 (1192500) CB-200-5 (1220600)       200-5-B (1020450)
.359-.389 9.12-9.88 0.343 8.71 1/4" UNF AT-201 (1192600) CB-201 (1220700)     TW-201 (1311400PT) 201-B (1020500)
.390-.420 9.91-10.67 0.375 9.52 1/4" UNF AT-202 (1192700) CB-202 (1220800)     TW-202 (1311500) 202-B (1020600)
.421-.452 10.69-11.48 0.406 10.31 1/4" UNF AT-203 (1192800) CB-203 (1220900)     TW-203 (1311600) 203-B (1020700PT)
.452-.483 11.48-12.27 0.437 11.10 1/4" UNF AT-204 (1192900) CB-204 (1221000)     TW-204 (1311700) 204-B (1020800)
.484-.514 12.29-13.06 0.468 11.89 5/16" UNF AT-205 (1193000) CB-205 (1221100) CB-205-HP (1715190) CT-205 (1241600) TW-205 (1311800) 205-B (1020900)
.515-.545 13.08-13.84 0.500 12.7 5/16" UNF AT-206 (1193100) CB-206 (1221200) CB-206-HP (1715565) CT-206 (1241700) TW-206 (1311900) 206-B (1021000)
.546-.577 13.87-14.66 0.531 13.49 5/16" UNF AT-207 (1193200) CB-207 (1221300) CB-207-HP (1715561) CT-207 (1241800) TW-207 (1312000) 207-B (1021201)
.578-.608 14.68-15.44 0.562 14.27 5/16" UNF AT-208 (1193300) CB-208 (1221400) CB-208-HP (1715566) CT-208 (1241900) TW-208 (1312100) 208-B (1021400)
.578-.608 14.68-15.44 0.562 14.27 3/8" UNF AT-108 (1192000) CB-108 (1220300) CB-108-HP (1715567PT) CT-108 (1241100) TW-108 (1311300) 108-B (1021500)
.609-.639 15.47-16.23 0.593 15.06 3/8" UNF AT-209 (1193400) CB-209 (1221500) CB-209-HP (1715562) CT-209 (1242000) TW-209 (1312200) 209-B (1021600)
640-.675 16.26-17.15 0.625 15.88 3/8" UNF AT-210 (1193500) CB-210 (1221600) CB-210-HP (1715568) CT-210 (1242100) TW-210 (1312300PT) 210-B (1021810)
.676-.706 17.17-17.93 0.656 16.66 3/8" UNF AT-211 (1193600) CB-211 (1221700) CB-211-HP (1716249) CT-211 (1242200) TW-211 (1312400) 211-B (1022001)
.707-.737 17.96-18.72 0.687 17.45 3/8" UNF AT-212 (1193700) CB-212 (1221800) CB-212-HP (1715569PT) CT-212 (1242300) TW-212 (1312500) 212-B (1022100)

* "HP" Style drills are used for more aggressive cleaning with CC-325-HP cleaning motor


Drag your finger across the table to scroll

Tube I.D. Diameter of Drill or Brush Stud Thread AT (Standard) Drills CB (Carbide) Drills CB (Carbide) "HP" Drills* CT (Carbide Twist) Drills TW (Twist) Drills Wire Brush
in. mm in. mm Model (Order No.) Model (Order No.) Model (Order No.) Model (Order No.) Model (Order No.) Model (Order No.)
.738-.769 18.75-19.53 0.718 18.24 3/8" UNF AT-213 (1193800) CB-213 (1221900) CB-213-HP (1715570PT) CT-213 (1242400) TW-213 (1312600) 213-B (1022500)
.770-.800 19.56-20.32 0.750 19.05 3/8" UNF AT-214 (1193900) CB-214 (1222000) CB-214-HP (1715571) CT-214 (1242500) TW-214 (1312700) 214-B (1022700)
.801-.831 20.35-21.11 0.781 19.84 3/8" UNF AT-215 (1194000) CB-215 (1222100) CB-215-HP (1715859) CT-215 (1242600) TW-215 (1312800) 215-B (1022802)
.832-.862 21.13-21.89 0.812 20.62 3/8" UNF AT-216 (1194100) CB-216 (1222200) CB-216-HP (1715572) CT-216 (1242700) TW-216 (1312900) 216-B (1022900)
.863-.894 21.92-22.71 0.843 21.41 3/8" UNF AT-217 (1194200) CB-217 (1222300) CB-217-HP (1715573) CT-217 (1242800PT) TW-217 (1313000) 217-B (1023000)
.895-.925 22.73-23.50 0.875 22.23 3/8" UNF AT-218 (1194300) CB-218 (1222400) CB-218-HP (1715950) CT-218 (1242900) TW-218 (1313100) 218-B (1023100)
.926-.956 23.52-24.28 0.906 23.01 3/8" UNF AT-219 (1194400) CB-219 (1222500) CB-219-HP (1715730PT) CT-219 (1243000) TW-219 (1313200) 219-B (1023200)
.957-.987 24.31-25.07 0.937 23.80 3/8" UNF AT-220 (1194500) CB-220 (1222600) CB-220-HP (1716142PT) CT-220 (1243100) TW-220 (1313300) 220-B (1023304)
.998-1.024 25.35-26.01 0.968 24.59 3/8" UNF AT-221 (1194600) CB-221 (1222700) CB-221-HP (1716434) CT-221 (1243200PT) TW-221 (1313400) 221-B (1023400)
.1.025-1.055 26.04-26.80 1.000 25.40 3/8" UNF AT-222 (1194700) CB-222 (1222800) CB-222-HP (1716223) CT-222 (1243300PT) TW-222 (1313500) 222-B (1023600)
1.056-1.086 26.82-27.58 1.031 26.19 7/16" UNF AT-223 (1194800) CB-223 (1223000PT)   CT-223 (1243400) TW-223 (1313600) 223-B (1023700)
1.087-1.117 27.61-28.37 1.062 26.97 7/16" UNF AT-224 (1194900) CB-224 (1223000PT)   CT-224 (1243500) TW-224 (1313700) 224-B (1023800)
1.118-1.149 28.40-29.18 1.093 27.76 7/16" UNF AT-225 (1195000) CB-225 (1223100)   CT-225 (1243600) TW-225 (1313800) 225-B (1023900)
1.150-1.180 29.21-29.97 1.125 28.58 7/16" UNF AT-226 (1195100) CB-226 (1223200)   CT-226 (1243700) TW-226 (1313900) 226-B (1024001PT)
1.181-1.211 30.00-30.76 1.156 29.36 7/16" UNF AT-227 (1195200) CB-227 (1223300)   CT-227 (1243800) TW-227 (1314000) 227-B (1024100)
1.212-1.242 30.78-31.55 1.187 30.15 7/16" UNF AT-228 (1195300) CB-228 (1223400)   CT-228 (1243900) TW-228 (1314100) 228-B (1024200)
1.243-1.280 31.57-32.51 1.218 30.94 7/16" UNF AT-229 (1195400) CB-229 (1223500)   CT-229 (1244000) TW-229 (1314200) 229-B (1024300)

* "HP" Style drills are used for more aggressive cleaning with CC-325-HP cleaning motor


Large Diameter Twist Brushes (LDTB)

Large Diameter Twist Brushes from Airetool

Brush should be sized 1/8" — 3/16" smaller than the nominal tube I.D. for best results.

Drag your finger across the table to scroll

Diameter Model Number Order Number Stud Thread
in. mm
1.50 38.1 LDTB 1500 1003700 5/8 NC
1.62 41.2 LDTB 1625 1004500 5/8 NC
1.75 44.4 LDTB 1750 1004300 5/8 NC
1.87 47.6 LDTB 1875 1004600PT 5/8 NC
2.00 50.8 LDTB 2000 1004900 5/8 NC
2.12 53.9 LDTB 2125 1005800PT 5/8 NC
2.25 57.1 LDTB 2250 1005700PT 5/8 NC

Drag your finger across the table to scroll

Diameter Model Number Order Number Stud Thread
in. mm
2.50 63.5 LDTB 2500 1005401 5/8 NC
2.75 69.8 LDTB 2750 1005900 5/8 NC
3.00 76.2 LDTB 3000 1006500 5/8 NC
3.25 82.5 LDTB 3250 1007100 5/8 NC
3.50 88.9 LDTB 3500 1006900 5/8 NC
3.75 95.2 LDTB 3750 1007200 5/8 NC
4.00 101.6 LDTB 4000 1007300 5/8 NC

Flexible Shafts

To order the correct size Flexible Shaft, measure the tube I.D. and the length of the tube to be cleaned. Then refer to the chart at the right to select the proper shaft.

Drag your finger across the table to scroll

Tube I.D. Range Shaft O.D. Shaft Lengths in Feet - Model No. (Ordering No.)
15 25 35
Flexible Shafts for ABM-1800, ABM-1800-R and ABM-1200
.280" - .406 1/4" FS-1815-1/4 (2900402)    
.407" - .532" 3/8"   FS-1825-3/8 (2900403) FS-1835-3/8 (2900404)
.533" - .812" 1/2"   FS-1825-1/2 (2900405) FS-1835-1/2 (2900406)
Flexible Shafts for ABM-1900 and ABM-1900-R
.280" - .406 1/4" FS-1915-1/4 (2900407)    
.407" - .532" 3/8"   FS-1925-3/8 (2900408) FS-1935-3/8 (2900409)
.533" - .812" 1/2"   FS-1925-1/2 (2900410) FS-1935-1/2 (2900411)

  Features

Features currently unavailable.

  Dimensions

Dimensions currently unavailable.

  Contact mdi

Please fill out the form below and your personal mdi product expert will email you your quote. The more information that you provide the quicker we can send you a quote. Sending an incomplete quote request could mean that we have to contact you for necessary information before sending your quote. And know that our knowledgeable sales staff is standing by to help you with your order and with any questions.

In a rush? Use our Quick Contact form to get in touch with us fast!

If you have about five minutes to spare, though, you can save time on the quoting process by filling out the form below.






Please include your contact information so that we may reply to your request. Your contact information is private and will not be sold to any third party or used negatively in any way.







mdi does not advertise prices online. The cost of products is subject to change over time. In order to extend to you the best price that we can offer, we prefer to create written and emailed quotes which reflect any discounts or promotions currently available. Some products can be quoted over the phone, and expediting quotes and orders is always available per request.

See our Terms and Conditions for more information about the mdi sales process.


Call us any time Monday through Friday 7:30 AM to 5:30 PM ET.

Phone: (813) 241-4900 | Toll Free: 800-761-4298
Fax: (813) 571-0422 | Email or Fill Out the Form Above