Series G-800

Heat Exchanger & Condenser Tube Expanders



Series G-800 Condenser Expanders with 3 Rollers from Airetool

G-800 Series — 3-Roll Expanders

O.D. Range:
5/8 — 1-1/2 Inches
15.8 — 38.1 mm


Series G-800 Condenser Expanders with 5 Rollers from Airetool

G-800 Series — 5-Roll Expanders

O.D. Range:
1/2 — 1-1/2 Inches
12.7 — 38.1 mm


  Models

G-800 Series — 3-Roll Expanders

Drag your finger across the table to scroll

Tube O.D. Tube Gauge Tube I.D. Tube Sheet Thickness Min. I.D. Tool Enters Max. Expan. of Tool Mandrel Number (Order No.) 3/8 in. Sq. Dr. (9.5 mm) Recommended Rolling Airetrol Motors(Order No.)
1/2 in. to 1-1/2 in. (12.7 mm to 38.1 mm) 1-1/4 in. to 2-1/4 in. (31.7 mm to 57.1 mm)
in. mm bwg in. mm in. mm Tool No. (Order No.) Roll Set No. (Order No.) Tool No. (Order No.) Roll Set No. (Order No.) in. mm in. mm
1/2 12.7 14 0.083 2.10 0.334 8.48 797 (5005780) 797 (5512194)     0.324 8.22 0.374 9.49 797 (2131300) 720-550-B (8405391)
15 0.072 1.82 0.356 9.04 799 (5005782) R-1 (5284800)     0.348 8.83 0.398 10.10 799 (2131900)
16 0.065 1.65 0.370 9.39 801 (5005800)     0.360 9.14 0.410 10.41 M-1 (2511800) 720-1800-B-3/8 (8405512)
17 0.058 1.47 0.384 9.75 803 (5005900) R-2 (5285000)     0.374 9.49 0.424 10.76
18 0.049 1.24 0.402 10.21 805 1/2 (5006000) R-3 (5285200)     0.392 9.95 0.447 11.35 M-2 (2512100)
20 0.035 0.88 0.430 10.92 807 1/2 (5525444) R-4 (5285400)     0.420 10.66 0.480 12.19 M-3 (2512400)
5/8 15.8 12 0.109 2.76 0.407 10.33 805 5/8 (5006001) R-3 (5285200)     0.392 9.95 0.447 11.35 M-2 (2512100) 850-600-A (8405398)
13 0.095 2.41 0.435 11.04 807 5/8 (5006100) R-4 (5285400)     0.420 10.66 0.480 12.19 M-3 (2512400)
14 0.083 2.10 0.459 11.65 809 (5006200) R-4 (5285400) 810 (5006300) R-4-A (5285500) 0.449 11.40 0.509 12.92 M-4 (2512700)
15 0.072 1.82 0.481 12.21 811 5/8 (5006400) R-5 (5285800) 812 5/8 (5006500) R-5-A (5285900) 0.471 11.96 0.536 13.61 M-5 (2513000)
16 0.065 1.65 0.495 12.57 813 (5006600) R-6 (5286200) 814 (5006700) R-6-A (5286300) 0.485 12.31 0.550 13.97 850-1250-A (8405399)
17 0.058 1.47 0.509 12.92 815 5/8 (5006800) 816 5/8 (5006900) 0.499 12.67 0.564 14.32 M-6 (2513300)
18 0.049 1.24 0.527 13.38 817 5/8 (5007000) R-7 (5286600) 818 5/8 (5007100) R-7-A (5286700) 0.517 13.13 0.582 14.78
19 0.042 1.06 0.541 13.74 819 (5007200) R-7 (5286600) 820 (5007300) R-7-A (5286700) 0.531 13.48 0.596 15.13 M-8 (2513900)
20 0.035 0.88 0.555 14.09
21 0.032 0.81 0.561 14.24
22 0.028 0.71 0.569 14.45

Drag your finger across the table to scroll

Tube O.D. Tube Gauge Tube I.D. Tube Sheet Thickness Min. I.D. Tool Enters Max. Expan. of Tool Mandrel Number (Order No.) 3/8 in. Sq. Dr. (9.5 mm) Recommended Rolling Airetrol Motors(Order No.)
1/2 in. to 1-1/2 in. (12.7 mm to 38.1 mm) 1-1/4 in. to 2-1/4 in. (31.7 mm to 57.1 mm)
in. mm bwg in. mm in. mm Tool No. (Order No.) Roll Set No. (Order No.) Tool No. (Order No.) Roll Set No. (Order No.) in. mm in. mm
3/4 19.0 10 0.134 3.40 0.482 12.24 811 3/4 (5006401) R-5 (5285800) 812 3/4 (5006501) R-5-A (5285900) 0.471 11.96 0.536 13.61 M-5 (2513000) 850-600-A (8405398)
11 0.120 3.04 0.510 12.95 815 3/4 (5006801) R-6 (5286200) 816 3/4 (5006901) R-6-A (5286300) 0.499 12.67 0.564 14.32 M-6 (2513300)
12 0.109 2.76 0.532 13.51 817 3/4 (5007001) R-7 (5286600) 818 3/4 (5007101) R-7-A (5286700) 0.517 13.13 0.582 14.78
13 0.095 2.41 0.560 14.22 821 (5007400) R-8 (5287000) 822 (5007500) R-8-A (5287100) 0.550 13.97 0.615 15.62 M-8 (2513900)
14 0.083 2.10 0.584 14.83 823 (5007600) R-9 (5287400) 824 (5007700) R-9-A (5287500) 0.574 14.57 0.639 16.23
15 0.072 1.82 0.606 15.39 825 3/4 (5007800) R-10 (5287800) 826 3/4 (5007900) R-10-A (5287900) 0.596 15.13 0.661 16.78
16 0.065 1.65 0.620 15.74 827 (5008000) 828 (5008100) 0.605 15.36 0.685 17.39 M-9 (2514200) 850-1250-A (8405399)
17 0.058 1.47 0.634 16.10 829 3/4 (5008200) R-11 (5288200) 830 3/4 (5008300) R-11-A (5288300) 0.619 15.72 0.699 17.75
18 0.049 1.24 0.652 16.56
19 0.042 1.06 0.666 16.91 831 3/4 (5008400) R-12 (5288600) 832 3/4 (5008500) R-12-A (5288700) 0.642 16.30 0.722 18.33
20 0.035 0.88 0.680 17.27
21 0.032 0.81 0.686 17.42
22 0.028 0.71 0.694 17.62
7/8 22.2 10 0.134 3.40 0.607 15.41 825 7/8 (5007801) R-10 (5287800) 826 7/8 (5007901) R-10-A (5287900) 0.596 15.13 0.661 16.78 M-8 (2513900) 850-600-A (8405398)
11 0.120 3.04 0.635 16.12 829 7/8 (5008201) R-11 (5288200) 830 7/8 (5008301) R-11-A (5288300) 0.619 15.72 0.699 17.75 M-9 (2514200)
12 0.109 2.76 0.657 16.68 831 7/8 (5008401) R-12 (5288600) 832 7/8 (5008501) R-12-A (5288700) 0.642 16.30 0.722 18.33
13 0.095 2.41 0.685 17.39 833 (5008600) R-13 (5289000) 834 (5008700) R-13-A (5289100) 0.670 17.01 0.750 19.05 M-10 (2514500)
14 0.083 2.10 0.709 18.00 835 (5008800) R-14 (5289400) 836 (5008900) R-14-A (5289500) 0.685 17.39 0.774 19.65 M-11 (2514800)
15 0.072 1.82 0.731 18.56 837 (5009000) R-15 (5289800) 838 (5009100) R-15-A (5289900) 0.712 18.08 0.801 20.34
16 0.065 1.65 0.745 18.92 839 (5009200) 840 (5009300) 0.726 18.44 0.815 20.70 M-12 (2515100)
17 0.058 1.47 0.759 19.27 843 (5009600) R-16 (5290200) 844 (5009700) R-16-A (5290300) 0.740 18.79 0.829 21.05 850-1250-A (8405399)
18 0.049 1.24 0.777 19.73
1 25.4 8 0.165 4.19 0.670 17.01 841 (5009400) R-13 (5289000) 842 (5009500) R-13-A (5289100) 0.655 16.63 0.735 18.66 M-9 (2514200) 1050-400 (8404200)
9 0.148 3.75 0.704 17.88 835 (5008800) R-14 (5289400) 836 (5008900) R-14-A (5289500) 0.685 17.39 0.774 19.65 M-11 (2514800)
10 0.134 3.40 0.732 18.59 837 (5009000) R-15 (5289800) 838 (5009100) R-15-A (5289900) 0.712 18.08 0.801 20.34
11 0.120 3.04 0.760 19.30 843 (5009600) R-16 (5290200) 844 (5009700) R-16-A (5290300) 0.740 18.79 0.829 21.05 M-12 (2515100)
12 0.109 2.76 0.782 19.86 845 (5009800) R-17 (5290600) 846 (5009900) R-17-A (5290700) 0.763 19.38 0.852 21.64 850-600-A (8405398)
13 0.095 2.41 0.810 20.57 847 (5010000) R-18 (5291000) 848 (5010100) R-18-A (5291100) 0.791 20.09 0.880 22.35
14 0.083 2.10 0.834 21.18 849 (5010200) 850 (5010300) 0.810 20.57 0.909 23.08 M-13 (2515400)

Drag your finger across the table to scroll

Tube O.D. Tube Gauge Tube I.D. Tube Sheet Thickness Min. I.D. Tool Enters Max. Expan. of Tool Mandrel Number (Order No.) 3/8 in. Sq. Dr. (9.5 mm) Recommended Rolling Motors(Order No.)
1/2 in. to 1-1/2 in. (12.7 mm to 38.1 mm) 1-1/4 in. to 2-1/4 in. (31.7 mm to 57.1 mm)
in. mm bwg in. mm in. mm Tool No. (Order No.) Roll Set No. (Order No.) Tool No. (Order No.) Roll Set No. (Order No.) in. mm in. mm Airetrol Electric
1 25.4 15 0.072 1.82 0.856 21.74 851 (5010400) R-19 (5291400) 852 (5010500) R-19-A (5291500) 0.837 21.25 0.936 23.77 M-13 (2515400) 850-600-A (8405398)
16 0.065 1.65 0.870 22.09
17 0.058 1.47 0.884 22.45 855 (5010800) R-21 (5292200) 856 (5010900) R-21-A (5292300) 0.865 21.97 0.964 24.48 850-1250-A (8405399)
18 0.049 1.24 0.902 22.91
19 0.042 1.06 0.916 23.26 979-C-650/ ATC-900
20 0.035 0.88 0.930 23.62
1-1/8 28.5 8 0.165 4.19 0.795 20.19 853 (5010600) R-20 (5291800) 854 (5010700) R-20-A (5291900) 0.776 19.71 0.875 22.22 M-13 (2515400) 1050-400 (8404200) 979-C-300/ ATC-900
9 0.148 3.75 0.829 21.05 849 (5010200) R-18 (5291000) 850 (5010300) R-18-A (5291100) 0.810 20.57 0.909 23.08
10 0.134 3.40 0.857 21.76 851 (5010400) R-19 (5291400) 852 (5010500) R-19-A (5291500) 0.837 21.25 0.936 23.77
11 0.102 3.04 0.885 22.47 855 (5010800) R-21 (5292200) 856 (5010900) R-21-A (5292300) 0.865 21.97 0.964 24.48
12 0.109 2.76 0.907 23.03 857 (5011000) 858 (5011100) 0.883 22.42 0.982 24.94 M-14 (2515700) *
13 0.095 2.41 0.935 23.74 859 (5011200) R-22 (5292600) 860 (5011300) R-22-A (5292700) 0.916 23.26 1.015 25.78 979-C-650/ ATC-900
14 0.083 2.10 0.959 24.35 861 (5011400) R-23 (5293000) 862 (5011500) R-23-A (5293100) 0.935 23.74 1.044 26.51 M-15 (2516000) *
15 0.072 1.82 0.981 24.91 863 (5011600) R-24 (5293400) 864 (5011700) R-24-A (5293500) 0.962 24.43 1.071 27.20
16 0.065 1.65 0.995 25.27
17 0.058 1.47 1.009 25.62 867 (5012000) R-26 (5294200) 868 (5012100) R-26-A (5293500) 0.990 25.14 1.099 27.91 M-16 (2516300) *
18 0.049 1.24 1.027 26.08
1-1/4 31.7 8 0.165 4.19 0.920 23.36 865 (5011800) R-25 (5293800) 866 (5011900) R-25-A (5293900) 0.901 22.88 1.010 25.65 M-15 (2516000) *
9 0.148 3.75 0.954 24.23 861 (5011400) R-23 (5293000) 862 (5011500) R-23-A (5293100) 0.935 23.74 1.044 26.51
10 0.134 3.40 0.982 24.94 863 (5011600) R-24 (5293400) 864 (5011700) R-24-A (5293500) 0.962 24.43 1.071 27.20
11 0.120 3.04 1.010 25.65 867 (5012000) R-26 (5294200) 868 (5012100) R-26-A (5293500) 0.990 25.14 1.099 27.91 M-16 (2516300) *
12 0.109 2.76 1.032 26.21 869 (5012200) R-27 (5294600) 870 (5012300) R-27-A (5294700) 1.013 25.73 1.122 28.49
13 0.095 2.41 1.060 26.92 871 (5012400) R-28 (5295000) 872 (5012500) R-28-A (5295100 1.041 26.44 1.150 29.21 M-17 (2516600) *
14 0.083 2.10 1.084 27.53 873 (5012600) R-29 (5295400) 874 (5012700) R-29-A (5295500) 1.060 26.92 1.169 29.69
15 0.072 1.82 1.106 28.09 875 (5012800) R-30 (5295800) 876 (5012900) R-30-A (5295900) 1.087 27.60 1.196 30.37
16 0.065 1.65 1.120 28.44
17 0.058 1.47 1.134 28.80 879 (5013200) R-30 (5295800) 880 (5013300) R-30-A (5295900) 1.115 28.32 1.224 31.08 M-18 (2516900) *
18 0.049 1.24 1.152 29.26

* 1/2 in. Sq. Dr. (12.7 mm)


Drag your finger across the table to scroll

Tube O.D. Tube Gauge Tube I.D. Tube Sheet Thickness Min. I.D. Tool Enters Max. Expan. of Tool Mandrel Number (Order No.) 3/8 in. Sq. Dr. (9.5 mm) Recommended Rolling Motors(Order No.)
1/2 in. to 1-1/2 in. (12.7 mm to 38.1 mm) 1-1/4 in. to 2-1/4 in. (31.7 mm to 57.1 mm)
in. mm bwg in. mm in. mm Tool No. (Order No.) Roll Set No. (Order No.) Tool No. (Order No.) Roll Set No. (Order No.) in. mm in. mm Airetrol Electric
1-3/8 34.9 8 0.165 4.19 1.045 26.54 877 (5013000) R-31 (5296200) 878 (5013100) R-31-A (5296300) 1.026 26.06 1.135 28.82 M-17 (2516600) 1550-250 (8404280) 979-C-210/ ATC-900
9 0.148 3.75 1.079 27.40 873 (5012600) R-29 (5295400) 874 (5012700) R-29-A (5295500) 1.060 26.92 1.169 29.69
10 0.134 3.40 1.107 28.11 875 (5012800) R-30 (5295800) 876 (5012900) R-30-A (5295900) 1.087 27.60 1.196 30.37
11 0.120 3.04 1.135 28.82 879 (5013200) 880 (5013300) 1.115 28.32 1.224 31.08 M-18 (2516900) 979-C-300/ ATC-900
12 0.109 2.76 1.157 29.38 881 (5013400) R-32 (5296600) 882 (5013500) R-32-A (5296700) 1.133 28.77 1.242 31.54
13 0.095 2.41 1.185 30.09 883 (5013600) R-33 (5297000) 884 (5013700) R-33-A (5297100) 1.160 29.46 1.275 32.38 M-19 (2517200) 1550-900 (8404290)
14 0.083 2.10 1.209 30.70 885 (5013800) R-34 (5297400) 886 (5013900) R-34-A (5297500) 1.179 29.94 1.294 32.86 M-20 (2517500)
15 0.072 1.82 1.231 31.26
16 0.065 1.65 1.245 31.62 887 (5014000) R-35 (5297800) 888 (5014100) R-35-A (5297900) 1.206 30.63 1.321 33.55
1-1/2 38.1 8 0.165 4.19 1.170 29.71 889 (5014200) R-34 (5297400) 890 (5014300) R-34-A (5297500) 1.145 29.08 1.260 32.00 M-19 (2517200) 1550-250 (8404280) 979-C-210/ ATC-900
9 0.148 3.75 1.204 30.58 885 (5013800) 886 (5013900) 1.177 29.89 1.294 32.86 M-20 (2517500)
10 0.134 3.40 1.232 31.29 887 (5014000) R-35 (5297800) 888 (5014100) R-35-A (5297900) 1.206 30.63 1.321 33.55
11 0.120 3.04 1.260 32.00 891 (5014400) R-36 (5298200) 892 (5014500) R-36-A (5298300) 1.235 31.36 1.350 34.29 979-C-300/ ATC-900
12 0.109 2.76 1.282 32.56 893 (5014600) R-37 (5298600) 894 (5014700) R-37-A (5298700) 1.257 31.92 1.372 34.84
13 0.095 2.41 1.310 33.27 895 (5014800) R-37 (5298600) 896 (5014900) R-37-A (5298700) 1.285 32.63 1.400 35.56 M-21 (2517800) 1550-900 (8404290)
14 0.083 2.10 1.334 33.88
15 0.072 1.82 1.356 34.44 897 (5015000) R-38 (5299000) 898 (5015100) R-38-A (5299100) 1.331 33.80 1.446 36.72
16 0.065 1.65 1.370 34.79
17 0.058 1.47 1.384 35.15 899 (5015120) R-38 (5299000) 900 (5015150) R-38-A (5299100) 1.331 33.80 1.472 37.38 M-22 (2518100)
18 0.049 1.24 1.402 35.61
19 0.042 1.06 1.416 35.96
20 0.035 0.88 1.430 36.32

G-800 Series — 5-Roll Expanders

Drag your finger across the table to scroll

Tube O.D. Tube Gauge Tube I.D. Tube Sheet Thickness Min. I.D. Tool Enters Max. Expan. of Tool Mandrel Number (Order No.) 3/8 in. Sq. Dr. (9.5 mm) Recommended Rolling Motors(Order No.)
1/2 in. to 1-1/2 in. (12.7 mm to 38.1 mm) 1-1/4 in. to 2-1/4 in. (31.7 mm to 57.1 mm)
in. mm bwg in. mm in. mm Tool No. (Order No.) Roll Set No. (Order No.) Tool No. (Order No.) Roll Set No. (Order No.) in. mm in. mm Airetrol Electric
5/8 15.8 17 0.058 1.47 0.509 12.92 815-5 (5517135) R-4-5 (5513832) 816-5 (5519516) R-4-A-5 (5517897PT) 0.499 12.67 0.564 14.32 M-9 (2514200) 850-1250-A (8405399)
18 0.049 1.24 0.527 13.38 817-5 (5514294) 818-5 (5521051) 0.517 13.13 0.576 14.63
19 0.042 1.06 0.541 13.74 819-5 (5514295) R-4-5 (5513832) 820-5 (5515647) R-4-A-5 (5517897) 0.531 13.48 0.596 15.13 M-11 (2514800)
20 0.035 0.88 0.555 14.09
21 0.032 0.81 0.561 14.24
22 0.028 0.71 0.569 14.45
3/4 19.0 13 0.095 2.41 0.560 14.22 821-5 (5513230) R-5-5 (5513231) 822-5 (5514482) R-5-A-5 (5518189) 0.550 13.97 0.615 15.62 M-11 (2514800) 850-600-A (8405398) 979-C-650/ ATC-900
14 0.083 2.10 0.584 14.83 823-5 (5515375) R-6-5 (5518187) 824-5 (5514171) R-6-A-5 (5517898) 0.574 14.57 0.629 15.97
15 0.072 1.82 0.606 15.39 825-5 (5522104) R-7-5 (5514393) 826-5 (5518376) R-7-A-5 (5517899) 0.590 14.98 0.661 16.78 M-12 (2515100)
16 0.065 1.65 0.620 15.74 827-5 (5513799) 828-5 (5513542) 0.605 15.36 0.680 17.27 M-13 (2515400) 850-1250-A (8405399)
17 0.058 1.47 0.634 16.10 829-5 (5513426) R-8-5 (5515995) 830-5 (5513413) R-8-A-5 (5515996) 0.619 15.72 0.699 17.75 M-13 (2515400)
18 0.049 1.24 0.652 16.56
19 0.042 1.06 0.666 16.91 831-5 (5513427) R-9-5 (5517888) 832-5 (5513264) R-9-A-5 (5517900) 0.642 16.30 0.729 18.51 M-13 (2515400)
20 0.035 0.88 0.680 17.27
21 0.032 0.81 0.685 17.39
22 0.028 0.71 0.694 17.62
7/8 22.2 13 0.095 2.41 0.685 17.39 833-5 (5517076) R-9-5 (5517888) 834-5 (5514704) R-9-A-5 (5517900) 0.670 17.01 0.747 18.97 M-14 (2515700) * 850-600-A (8405398) 979-C-650/ ATC-900
14 0.083 2.10 0.709 18.00 835-5 (5517735) R-10-5 (5518191) 836-5 (5515680) R-10-A-5 (5517901) 0.685 17.39 0.774 19.65 M-15 (2516000) *
16 0.065 1.65 0.745 18.93 839-5 (5518154) R-11-5 (5517889) 840-5 (5514564) R-11-A-5 (5517902) 0.685 17.39 0.750 19.05
17 0.058 1.47 0.759 19.27 843-5 (5517922) R-11-5 (5517889) 844-5 (5517923) R-11-A-5 (5517902) 0.740 18.79 0.824 20.92 M-17 (2516600) * 850-1250-A (8405399)
18 0.049 1.24 0.777 19.73

* 1/2 in. Sq. Dr. (12.7 mm)


Drag your finger across the table to scroll

Tube O.D. Tube Gauge Tube I.D. Tube Sheet Thickness Min. I.D. Tool Enters Max. Expan. of Tool Mandrel Number (Order No.) 1/2 in. Sq. Dr. (12.7 mm) Recommended Rolling Motors(Order No.)
1/2 in. to 1-1/2 in. (12.7 mm to 38.1 mm) 1-1/4 in. to 2-1/4 in. (31.7 mm to 57.1 mm)
in. mm bwg in. mm in. mm Tool No. (Order No.) Roll Set No. (Order No.) Tool No. (Order No.) Roll Set No. (Order No.) in. mm in. mm Airetrol Electric
7/8 22.2 19 0.042 1.06 0.791 20.09 845-5 (5513810) R-11-5 (5517889) 846-5 (5517924) R-11-A-5 (5517902) 0.763 19.38 0.851 21.61 M-18 (2516900) 850-1250-A (8405399) 979-C-650/ ATC-900
20 0.035 0.88 0.805 20.44
21 0.032 0.81 0.811 20.59
22 0.028 0.71 0.819 20.80
1 25.4 12 0.109 2.76 0.782 19.86 845-5 (5513810) R-11-5 (5517889) 846-5 (5517924) R-11-A-5 (5517902) 0.763 19.38 0.852 21.64 M-18 (2516900) 850-600-A (8405398)
13 0.095 2.41 0.810 20.57 847-5 (5513379) R-13-5 (5513741) 848-5 (5517099) R-13-A-5 (5517903) 0.791 20.09 0.880 22.35
14 0.083 2.10 0.834 21.18 849-5 (5514922) R-12-5 (5517890) 850-5 (5513331) R-12-A-5 (5515825) 0.810 20.57 0.909 23.08 M-20 (2517500)
15 0.072 1.82 0.856 21.74 851-5 (5513778) R-14-5 (5517894) 852-5 (5513330) R-14-A-5 (5515826) 0.837 21.25 0.936 23.77
16 0.065 1.65 0.870 22.09
17 0.058 1.47 0.884 22.45 855-5 (5515194) R-13-5 (5513741) 856-5 (5513745) R-13-A-5 (5517903) 0.865 21.97 0.965 24.51 M-21 (2517800) 850-1250-A (8405399)
18 0.049 1.24 0.902 22.91
19 0.042 1.06 0.916 23.26
20 0.035 0.88 0.930 23.62
21 0.032 0.81 0.936 23.77 857-5 (5513825) R-15-5 (5513833) 858-5 (5515935) R-15-A-5 (5517907) 0.883 22.42 0.997 25.32 M-21 (2517800)
22 0.028 0.71 0.944 23.97
1-1/8 28.5 12 0.109 2.76 0.907 23.03 857-5 (5513825) R-15-5 (5513833) 858-5 (5515935) R-15-A-5 (5517907) 0.883 22.42 0.997 25.32 M-21 (2517800) 1050-400 (8404200) 979-C-300/ ATC-900
13 0.095 2.41 0.935 23.74 859-5 (5514397) R-16-5 (5518056) 860-5 (5513492) R-16-A-5 (5517904) 0.916 23.26 1.000 25.40
14 0.083 2.10 0.959 24.35 861-5 (5513325) R-17-5 (5517891) 862-5 (5513747) R-17-A-5 (5517905) 0.935 23.74 1.043 26.49
1-1/4 31.8 15 0.072 1.82 1.106 28.09 875-5 (5513884) R-21-5 (5517887) 876-5 (5519970) R-21-A-5 (5513291) 1.087 27.60 1.196 30.37 876-5 (2975348) 1050-400 (8404200) 979-C-650/ ATC-900
16 0.065 1.65 1.120 28.44 880-5 (2968789)
17 0.058 1.47 1.134 28.80 879-5 (5513993) R-21-5 (5517887) 880-5 (5512151 R-21-A-5 (5513291) 1.115 28.32 1.231 31.26
18 0.049 1.24 1.152 29.26
19 0.042 1.06 1.166 29.61
20 0.035 0.88 1.180 29.97
21 0.032 0.81 1.186 30.12
22 0.028 0.71 1.194 30.32
1-3/8 34.9 12 0.109 2.76 1.154 29.31 881-5 (5516001) R-21-5 (5517887) 882-5 (5514657 R-21-A-5 (5513291) 1.133 28.77 1.242 31.54 882-5 (2973230) 1550-250 (8404280) 979-C-210/ ATC-900
14 0.083 2.10 1.209 30.70 885-5 (5513252) R-23-5 (5517892) 886-5 (5515778) R-23-A-5 (5518192) 1.179 29.94 1.296 32.91
1-1/2 38.1 17 0.058 1.47 1.384 35.15 899-5 (5513850) R-29-5 (5517893) 900-5 (5517605) R-29-A-5 (5517906) 1.331 33.80 1.489 37.82 900-5 (2975262) 1550-900 (8404290) 979-C-300/ ATC-900
18 0.049 1.24 1.402 35.61
19 0.042 1.06 1.416 35.96
20 0.035 0.88 1.430 36.32
21 0.032 1 1.436 36.47
22 0.028 0.71 1.444 36.67

  Features

All G-800 Series tube expanders are supplied with a flip collar with a 10-32 UNF auto-lube port. The flip collar allows for flush and recessed tube rolling. The standard expander is supplied with a recess of 1/8" (3 mm). Other recess lengths are available.


G-800 Series — 3-Roll Expanders

  • Expanders with 1-1/2 in. (38.1 mm) long rolls will accommodate tube sheet thicknesses of 1/2 in. to 1-1/2 in. (12.7 mm to 38.1 mm)
  • Expanders with 2-1/4 in. (57.1mm) long rolls will accommodate tube sheet thicknesses from 1-1/4 in. to 2-1/4 in. (31.7 mm to 57.1 mm)
  • Reversible Thrust Collar design allows flush and 1/8 in. recess tube rolling. Collars have lubrication port for use with auto-lube configured ATR and DAS tube rolling systems.

G-800 Series — 5-Roll Expanders

  • Expanders with 1-1/2 in. (38.1 mm) long rolls will accommodate tube sheets from 1/2 in. to 1-1/2 in. (12.7mm to 38.1 mm)
  • Expanders with 2-1/4 in. (57.1 mm) long rolls will accommodate tube sheets from 1-1/4 in. to 2-1/4 in. (31.7mm to 57.1 mm)
  • Reversible Thrust Collar design allows flush and 1/8 in. recess tube rolling. Collars have lubrication port for use with auto-lube configured ATR and DAS tube rolling systems.20 BWG .035" (0.9 mm).

NOTE: For best results the Airetool five-roll expander should be fitted with a thin wall thrust collar when being used to roll tubing with 20 BWG .035" (0.9 mm).


  Dimensions

Dimensions currently unavailable.

  Catalogs

  Contact mdi

Please fill out the form below and your personal mdi product expert will email you your quote. The more information that you provide the quicker we can send you a quote. Sending an incomplete quote request could mean that we have to contact you for necessary information before sending your quote. And know that our knowledgeable sales staff is standing by to help you with your order and with any questions.

In a rush? Use our Quick Contact form to get in touch with us fast!

If you have about five minutes to spare, though, you can save time on the quoting process by filling out the form below.






Please include your contact information so that we may reply to your request. Your contact information is private and will not be sold to any third party or used negatively in any way.







mdi does not advertise prices online. The cost of products is subject to change over time. In order to extend to you the best price that we can offer, we prefer to create written and emailed quotes which reflect any discounts or promotions currently available. Some products can be quoted over the phone, and expediting quotes and orders is always available per request.

See our Terms and Conditions for more information about the mdi sales process.


Call us any time Monday through Friday 7:30 AM to 5:30 PM ET.

Phone: (813) 241-4900 | Toll Free: 800-761-4298
Fax: (813) 571-0422 | Email or Fill Out the Form Above