Electronic Controller and Electric Rolling Motors



TEC 8000VS Electronic Controller from Airetool

TEC 8000VS Electronic Controller


  Models

ATC Series

Drag your finger across the table to scroll

Model Number Order Number
Accessories
Universal 2KVA Step Down Transformer 220/110 VAC 8405529

Drag your finger across the table to scroll

Model Number Order Number Input Voltage Current Requirements Weight

Dimensions

Supply Adjustment Length Width Height
VAC Hz. Amps Amps lbs. Kg in. mm in. mm in. mm
Electronic Controller
ATC 900* 2996326 120 50/60 20 0.1 7.2 3.27 11.75 298.5 12 304.8 7.63 193.8

*Not CE certified
Standard Equipment: Power Cord 2996733PT
Optional Equipment: Step down transformer (220VAC to 110VAC) 8405529

Drag your finger across the table to scroll

Model Number Order Number Maximum Torque Minimum Torque Tube Capacity* Weight Chucks
fl. lbs. Nm ft. lbs. Nm in. mm lbs. Kg in.
Electric Rolling Motors
979-C-210 8405489 210 40.0 54.2 20.0 19.0 3/4–2 19.1–50.8 32.0 14.5 3/8-1/2 QC
979-C-300 8405488 300 28.0 37.9 14.0 8.8 3/4–1-1/2 19.1–38.1 32.0 14.5 3/8-1/2 QC
979-C-650 8405487 650 13.0 17.6 6.5 128.7 5/8–1-1/4 15.9–31.8 32.0 14.5 3/8-1/2 QC
999-C-45 8405492 45 190.0 257.5 95.0 128.8 2–4 50.8–101.6 32.0 14.5 3/4-1

*May vary due to tube wall, material and/or tube sheet thickness.
Standard Equipment: Controller cable

Drag your finger across the table to scroll

Model Number Order Number Length
ft. m
System Cables
ATC 900 Power Cord, GFCI 2996733PT 8.0 2.5
979 Motor to Controller 8405493 15.0 4.6
979 Motor to Wall Outlet 8405495 10.0 3.1
999 Motor to Controller 8405494 15.0 4.6
999 Motor to Wall Outlet 8405545 10.0 3.1

TEC 7000 Series

Drag your finger across the table to scroll

Model Number Order Number Input Voltage Current Requirements Weight

Dimensions

Supply Adjustment Length Width Height
VAC Hz. Amps Amps lbs. Kg in. mm in. mm in. mm
Electronic Controller
TEC 7000 941204 110-240 50/60 650 1700 25.7 11.7 13.4 340.0 6.7 170.0 16.5 420.0

Optional Equipment: TEC-9000 FS foot switch, order number 7940080

Drag your finger across the table to scroll

Model Number Order Number Speed RPM Tube Capacities* Voltage Power (Watt) Chucks (in.)
in. mm Input Output Standard Optional
Electric Rolling Motor Specifications
TEC 72636 941312 1 1400 1/4 - 3/8 6.35 - 9.52 230 300 180 1/4 QC  
TEC 7113 941315 2 450-1550 5/8 - 1 1/4 15.88 - 31.75 110 650 450 3/8, 1/2 QC  
TEC 7213 941313 2 450-1550 5/8 - 1 1/4 15.88 - 31.75 230 650 450 3/8, 1/2 QC  
TEC 7132 941203 4 110-190 350-590 3/4 - 2 1/2 19.05 - 63.50 110 1500 980 MC 3 x 3/8 QC MC 3 x 1/2 QC MC 3 x 1/2 SC
TEC 7232 941202 4 110-190 350-590 3/4 - 2 1/2 19.05 - 63.50 230 1500 980 MC 3 x 3/8 QC MC 3 x 1/2 SC MC 3 x 3/4 SC

* May vary due to tube wall, material and/or tube sheet thickness.


TEC 8000VS Series

Please see the Features tab for more information on the TEC 8000VS Series electronic controller.

  Features

ATC Series

  • ATC-900 Controller automatically identifies connected motor
  • GFCI Power Cord for operator safety
  • Expansion counter increments each time the controller shuts off the tool
  • Up/down pushbuttons used to preset torque shutoff set point in 0.1Amp increments
  • Auxiliary Receptacles for Trip Light and Lubricator

The ATC-900 Electronic Controller is a compact, lightweight and durable microprocessor based electronic motor controller. It is designed to provide accurate torque control for Airetool electric rolling motors by monitoring the amperage that the tool is using and comparing it to a preset current limit value. When the preset current limit value is reached, the controller opens the circuit which stops the motor. The current limit value is adjusted using the up/ down push-buttons on the front of the controller to increment or decrement the current limit set point.

Airetool Electric Rolling Motors may be used without the ATC-900 Electronic Controller and plugged directly into a wall outlet using a "Optional" Direct Power Cord.

Airetool Electric Rolling Motors may be used with the DAS II Dominator "Basic Unit" by using a 8405583PT Mounting Kit.


TEC 7000 Series Electronic Controller

  • CE Certified design
  • Microprocessor controlled tube expansion
  • Memory storage up to 3000 cycles
  • Operating language in English or German
  • Statistics for Quality Assurance include; Min / Max value for the number of expansion cycles in memory can be shown on display or send to the serial printer port
  • Programmable timers for; cycle start, reverse pause, end of cycle, and a suppress timer for low torque value settings.
  • Programmable torque shut-off value and high / low torque limits
  • Three cycle modes - manual, semi-automatic, and full automatic

TEC 7000 series electronic controller for use with hand-held rolling motors and trolley type units (with telescopic shaft).


TEC 8000VS Series Electronic Controller

  • CE Certified design
  • Standard 1-phase operation 230V supply, optional 120V supply
  • Universal controller for use with 3-phase motors or brushless servomotors
  • Unique variable speed motor control
  • Programming functionality the same as TEC 7000
  • Custom solutions designed for TEC Controllers working with 3 ph - 42 Volt transformers used in multi-spindle systems, applications with robot and/or articulating arm tool holder systems, and more.

TEC 8000VS series electronic controller for use with trolley type units (with telescopic shaft).

  Dimensions

ATC Series

Drag your finger across the table to scroll

Model Number Order Number

Dimensions

Length Width Height
in. mm in. mm in. mm
Electronic Controller
ATC 900 2996326 11.75 298.5 12 304.8 7.63 193.8

TEC 7000 Series

Drag your finger across the table to scroll

Model Number Order Number

Dimensions

Length Width Height
in. mm in. mm in. mm
Electronic Controller
TEC 7000 941204 13.4 340.0 6.7 170.0 16.5 420.0

  Contact mdi

Please fill out the form below and your personal mdi product expert will email you your quote. The more information that you provide the quicker we can send you a quote. Sending an incomplete quote request could mean that we have to contact you for necessary information before sending your quote. And know that our knowledgeable sales staff is standing by to help you with your order and with any questions.

In a rush? Use our Quick Contact form to get in touch with us fast!

If you have about five minutes to spare, though, you can save time on the quoting process by filling out the form below.






Please include your contact information so that we may reply to your request. Your contact information is private and will not be sold to any third party or used negatively in any way.







mdi does not advertise prices online. The cost of products is subject to change over time. In order to extend to you the best price that we can offer, we prefer to create written and emailed quotes which reflect any discounts or promotions currently available. Some products can be quoted over the phone, and expediting quotes and orders is always available per request.

See our Terms and Conditions for more information about the mdi sales process.


Call us any time Monday through Friday 7:30 AM to 5:30 PM ET.

Phone: (813) 241-4900 | Toll Free: 800-761-4298
Fax: (813) 571-0422 | Email or Fill Out the Form Above