DAS II Dominator Tube Rolling Systems



Das 100 TRS Bench Mounted Tube Rolling System from Airetool

DAS 100 TRS Bench Mounted Tube Rolling System


DAS II Dominator System by Airetool

DAS II Dominator System


DAS II Rolling Motors by Airetool

DAS II Rolling Motors


  Models

DAS 100 TRS

Drag your finger across the table to scroll

Model Number Order Number Post Height Vertical Travel Horizontal Travel
in. mm in. mm in. mm
DAS 100 THB - Balancer Less Rolling Motor
DAS 100 THB 5526551PT 29.0 736.6 14.5 368.3 77.0 1955.8

Drag your finger across the table to scroll

Model Number Order Number Speed & Torque @ 90 psig Air Pressure CFM Tube Capacities* Quick Change Chuck (in.)†
Free Speed Max. Torque Min. Torque
RPM in. lbs. Nm in. lbs. Nm in. mm Included Optional
DAS 100 TRS 720 Tube Rolling Systems with Motors
DAS 100 720 2500B 5525242 2500 20.0 2.26 2.0 0.23 17 1/4 6.3 1/4 3/8
DAS 100 720 1800B 5525243 1800 27.0 3.05 2.0 0.23 17 3/8 - 1/2 12.7 1/4 3/8
DAS 100 720 1800B 3/8 L** 5526141 1800 27.0 3.05 2.0 0.23 17 3/8 - 1/2 12.7 3/8 1/4
DAS 100 720 550B 5525244 550 75.0 8.48 2.0 0.23 17 1/2 - 5/8 15.8 3/8 1/4
DAS 100 720 550B L** 5526142 550 75.0 8.47 2.0 0.23 17 1/2 - 5/8 15.8 3/8 1/4

*Varies depending on tube material, gauge, and tube sheet thickness
**L = Auto-lube


DAS II Dominator Systems

Drag your finger across the table to scroll

Model Number Order Number Movement Lift Capacity Operating Pressure Operating Hose Allowable Torque
Max. Torque Min. Torque
ft. m ft. m lbs. kg PSI Bar in. mm ft-lbs. Nm
Automatic Tube Rolling System Less DAS II Airetrol
DAS II Dominator 5526081 5.0 1.5 5.0 1.5 55 25 90 6.2 3/4 19.1 125 169
DAS II Dominator w/lube 5526140 5.0 1.5 5.0 1.5 55 25 90 6.2 3/4 19.1 125 169
Basic Positioning Unit*
DAS II Dominator Basic Unit 5529158 5.0 1.5 5.0 1.5 55 25 90 6.2 3/4 19.1 125 169

*The basic positioning unit can be used to support a wide variety of tube service tools including drills, end facers, tube cutting tools, tube pulling rams, and tube cleaning motors

Drag your finger across the table to scroll

DAS II Component DAS II Dominators
Basic Unit* Standard With Lube
Base
Tower
Articulating Tool Arm
Filter & Lubricator (Tool)  
Airetool Supply Hoses  
Lubricator (Expander)    

DAS II Dominator Motors

Drag your finger across the table to scroll

Model Number Order Number Free Speed CFM Maximum Torque Minimum Torque Chucks (in.)†
RPM ft. lbs. Nm ft. lbs. Nm Included Optional
DAS II Dominator Rolling Motors*
DAS II 850 1250 Airetrol 8405562 1100 48 9.6 13.0 1.8 2.4 3/8 1/2
DAS II 850 1250 CL Airetrol 8405567 1100 48 9.6 13.0 1.8 2.4 3/8 1/2
DAS II 850 600 Airetrol 8405569 500 48 16.0 21.7 2.6 3.5 3/8, 1/2
DAS II 850 600 CL Airetrol 8405578 500 48 16.0 21.7 2.6 3.5 3/8, 1/2
DAS II 1050 400 TCL Airetrol 8405594 394 68 29.5 40.0 7.5 10.2 3/8, 1/2 3/4 - 1
DAS II 1550 900 Airetrol 8405563 756 75 30.7 41.6 4.7 6.4 3/8, 1/2 3/4, 1
DAS II 1550 900 CL Airetrol 8405565 756 75 30.7 41.6 4.7 6.4 3/8, 1/2 3/4, 1
DAS II 1550 900 T Airetrol 8405576 756 75 30.7 41.6 4.7 6.4 3/8, 1/2 3/4, 1
DAS II 1550 900 TCL Airetrol 8405580 756 75 30.7 41.6 4.7 6.4 3/8, 1/2 3/4, 1
DAS II 1550 250 Airetrol 8405564 217 75 100.0 135.5 25.0 33.9 3/4, 1 3/8, 1/2
DAS II 1550 250 T Airetrol 8405577 217 75 100.0 135.5 25.0 33.9 3/4, 1 3/8, 1/2
DAS II 1550 250 CL Airetrol 8405568 271 75 100.0 135.5 25.0 33.9 3/4, 1 3/8, 1/2

† 3/8 & 1/2 are QC Chucks (quick change)
* Configurations
No suffix - Basic Airetrol, push-to-start (PTS)
C suffix - PTS with Counter
L suffix - PTS with Lubricator
T suffix - Timer (continuous cycling, negates PTS, available only on 1050 & 1550 Series)


  Features

DAS-100-TRS Tube Rolling System

  • Absorbs torque reaction while supporting tool weight for improved productivity and ergonomics
  • Aligns expander with tube sheet for better repeatability
  • Push-to-start tube rolling cycle
  • Utilizes G-900, G-1300 and G-800 series tube expanders
  • Auto-lube system configurations for use with G-800 series expanders with lube collars

Tube rolling system for bench top tube rolling. The support post can be mounted directly on a work-bench or workstation pedestal for easy access. Suitable for tube rolling applications of 1/4" thru 5/8" O.D. tubes.

With the tube expander positioned inside the tube, slight forward pressure on the Airetrol starts the motor in forward direction to expand the tube. Once the preset torque is met, the motor automatically reverses and the tube expander can be removed from the tube. The tube expander holder is spring loaded, keeping the tube expander in the retracted position to assist the expander entering the tube.


DAS II Dominator Tube Rolling System

  • Fully pneumatic system for fabrication shops and/or field service work
  • "Basic" unit works well with tube pulling, tube end facing, and orbital welding equipment
  • Greatly enhances the accuracy of tube rolling reducing costly rework of improperly rolled tubes
  • Increases expander life (up to 3X) compared to conventional hand-held equipment
  • Ergonomic design supports tool weight and torque reaction
  • Floor lock holds system in place for stability while rolling tubes
  • Right or left hand operation without conversion
  • Five foot vertical and horizontal reach
  • Available in three different configurations: Basic Unit*, Standard, Lubricator

The Airetool DAS II Dominator Tube Rolling System was designed to take pneumatic tube rolling technology to the next level using time proven Airetrol rolling motors outfitted with on-board pneumatic control logic.


DAS II Dominator Rolling Motors

  • Time proven torque control rolling motors with on-board pneumatic control logic
  • Simple dial-a-torque adjustment collar for easy set up
  • Push-to-start configurations (no suffix) run only when activated, reducing noise and conserving shop air
  • Timed Start* configurations (T suffix) cycle continuously for trigger free tube rolling
  • Tool Options include "Cycle Counter" (C suffix) and "Expander Lubricator" (L suffix)

The Airetool DAS II Dominator Rolling Motors are designed to deliver power, performance, and durability while providing accurate and repeatable tube expansion.

Examples: DAS II 1550 900 TCL is a timed start model with counter & lube
DAS II 850 1250 CL is a push-to-start model with counter & lube

*Timed Start option will run continuously when the toggle switch is in the "on" position. After the tube is rolled and the tool switches into reverse rotation, an adjustable delay timer is activated. The tool will start running in the forward direction again after the time delay is finished. (Available only on 1050 & 1550 Series.)

  Dimensions

Dimensions currently unavailable.

  Contact mdi

Please fill out the form below and your personal mdi product expert will email you your quote. The more information that you provide the quicker we can send you a quote. Sending an incomplete quote request could mean that we have to contact you for necessary information before sending your quote. And know that our knowledgeable sales staff is standing by to help you with your order and with any questions.

In a rush? Use our Quick Contact form to get in touch with us fast!

If you have about five minutes to spare, though, you can save time on the quoting process by filling out the form below.






Please include your contact information so that we may reply to your request. Your contact information is private and will not be sold to any third party or used negatively in any way.







mdi does not advertise prices online. The cost of products is subject to change over time. In order to extend to you the best price that we can offer, we prefer to create written and emailed quotes which reflect any discounts or promotions currently available. Some products can be quoted over the phone, and expediting quotes and orders is always available per request.

See our Terms and Conditions for more information about the mdi sales process.


Call us any time Monday through Friday 7:30 AM to 5:30 PM ET.

Phone: (813) 241-4900 | Toll Free: 800-761-4298
Fax: (813) 571-0422 | Email or Fill Out the Form Above